







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Dallas Homeowners
Dallas fences take a beating that most of the country doesn’t see. Between the black clay soil that swells and shrinks with every wet-and-dry cycle and the straight-line winds that roll through North Texas in spring, a fence that looks fine in year two can be leaning by year four. Our technicians have up to 19 years of experience setting posts in this ground, and they’ll tell you plainly what your soil, slope, and property line require before anyone digs. Rowan Construction Group Dallas installs wood, vinyl, aluminum, iron, and chain link fences with a written flat price before work starts, under Clause 1 of the Haven Standard. Call (833) 954-5327 and a live person answers, day or night.
What Our Fence Installation Service Includes
Every fence is a different job, and each material solves a different problem. Here’s what we actually build and repair across Dallas.
Wood Fence
Cedar and pressure-treated pine privacy fencing remains the standard across Dallas neighborhoods, and it’s what most homeowners picture when they think of a backyard fence. You need wood when you want height, privacy, and a natural look at a lower material cost than masonry. Our crews set posts in concrete below the city’s frost depth, brace every corner, and space pickets to account for the seasonal movement that North Texas humidity causes in untreated lumber.

Chain Link Fence
Chain link is the practical choice for side yards, dog runs, and property boundaries where visibility and budget both matter. You need it when security and durability matter more than appearance, or when you’re fencing a lot line on a rental or commercial parcel. We install galvanized and vinyl-coated chain link in heights from 3 to 8 feet, with proper tension bands and gate hardware that won’t sag within a year. Read more about our full Fence Installation in Dallas service.

Vinyl Fence
Vinyl fencing resists rot, termites, and the UV bleaching that fades painted wood within a few Dallas summers. You need vinyl when you want the privacy of wood with near-zero maintenance, especially on a west-facing line that takes the worst afternoon sun. We install vinyl over a properly prepped post system and confirm manufacturer specs on rail spacing, because a vinyl fence installed on the wrong post spacing will bow in the first hot season.

Aluminum Fence
Aluminum ornamental fencing gives you the look of wrought iron at a fraction of the weight and with no rust concerns. You need it for pool enclosures, front-yard definition, and property lines where you want visibility rather than a solid wall. Our technicians level every panel against the ground grade rather than leaving uneven “step” gaps, and we confirm local pool-code height and self-latching gate requirements before the build.
Iron Fence
Iron fencing delivers the heaviest, most permanent appearance of any metal fence and suits historic properties and homes where curb presence matters. You need it when you want a lifetime material and don’t mind the welding and finishing work involved. We build iron sections with welded joints, address corrosion control on the finish, and set posts in concrete footings sized to the panel weight so the fence stays plumb.
Fence Repair
Most fence problems are one of three things: a rotted post at the base, a sagging gate, or a section leaning after a storm. You need repair rather than replacement when the posts are still sound and the damage is localized. We diagnose whether the issue is the post footing, the hardware, or the panel, and we quote a written repair price before any work begins, with a documented photo record of what we found.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
Fence components come in a wider range of brands than most homeowners expect, and we work with what’s specified on each job rather than pushing whatever’s easiest to source. On the vinyl side, we’re familiar with the performance differences between major manufacturers and know where a particular profile tends to flex, fade, or hold up best against Dallas sun. For windows and door components that sometimes tie into exterior fencing and gate projects, we’ve worked alongside installations using CGI and CWS products and understand how those systems interface with the surrounding structure.
For metal fencing and gates, we know where iron and aluminum hardware tends to fail first and what replacements hold. When your project touches exterior glazing or a gate integrated with a door system, we’ve coordinated with installations using ES Windows and ECO Window Systems. Whether you have a specific brand in mind or any other make, we can help you choose materials that fit the job and the budget.
Signs You Need Fence Installation Right Now
- Posts leaning after wind or rain. A leaning post usually means the footing failed or the soil shifted, and once one goes, the panels attached to it pull on their neighbors. In Dallas’s expanding clay, a post that leans after a rain isn’t going to straighten on its own.
- Rotten wood at the post base. Push a screwdriver into the base of a post. If it sinks without resistance, the post is failing from the ground up, and that rot will take the whole section with it. Wood fence posts typically rot first right at the soil line where moisture collects.
- Panels sagging or separating. Gaps opening between pickets, or rails pulling loose from posts, signal that the fence has lost structural integrity. It’s often a hardware or framing problem rather than the panel itself.
- Gates dragging or not latching. A gate that scrapes the ground or won’t close is usually a hinge, post, or ground-settling problem. It’s a small fix now and a bigger one once the frame twists.
- Rust bleeding or finish peeling on metal. Rust at welds and joints on iron or aluminum fencing means the protective finish has failed. Left alone, it spreads and weakens the structure at the exact points that carry the load.
Our Fence Installation Process – Step by Step
- 1
On-site assessment and property line check. We walk the line with you, confirm the property boundaries, and evaluate soil conditions, slope, and existing utilities. This is where the black clay ground and drainage patterns of your specific lot come into the plan.
- 2
Written flat price and scope. You get a flat price with a written scope and a written warranty before any work starts. No “call for a quote” and no vague estimates; the number is on paper so you can screenshot it and compare. Clause 1 of the Haven Standard means the price is written before anyone starts.
- 3
Materials and layout confirmed. We confirm the material, height, spacing, and gate placement against the written scope, and any change to the plan requires a signed change order before work proceeds. That discipline is why our projects finish within a few percent of the agreed cost.
- 4
Installation with documented progress. Posts go in at the specified depth and spacing, panels are set level and plumb, and gates are hung and tested. Every visit includes a documented photo record as a standard deliverable, not an upgrade.
- 5
Final walkthrough and warranty. We walk the finished fence with you, confirm the gates swing and latch, and hand off the written warranty along with the photo record. The 365-Day Done Right Promise backs the work: if it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Dallas?

Fence installation in Dallas typically runs $3,500 – $9,000 for a standard residential yard, depending on material, linear footage, and site conditions. A typical wood privacy fence runs $3,500 – $7,000 for a 150-to-200-foot run, while a vinyl fence of the same length runs $3,500 – $9,000. Aluminum ornamental fencing runs $4,000 – $10,000, and iron sits at the higher end because of the welding and finishing work involved. Chain link is the most economical for longer boundary lines.
Several things move the number:
- Linear footage and height – a 6-foot privacy fence over 200 feet is a different job than a 4-foot side-yard run.
- Material and gauge – cedar versus pressure-treated pine, vinyl profile thickness, aluminum versus iron.
- Site conditions – slope, rocky ground, and the depth of post footings your soil demands.
- Gates and hardware – a double drive gate adds cost over a basic walk gate.
- Removal and haul-off – taking out an old fence and disposing of it is priced separately.
To avoid overpaying, get a written line-item quote and compare scope, not just the bottom line. Our free estimate comes with a written flat price and written scope, and we’ll review a competitor’s quote line by line at no charge through our Free Second Opinion offer. Call (833) 954-5327 for an exact quote; estimates are free.
Fence Installation Near Dallas – Our Service Area
We install and repair fences throughout Dallas and the surrounding metro, including Fence Installation in Balch Springs, Mesquite, Hutchins, Garland, Sunnyvale, Richardson, Rowlett, Seagoville, Sachse, Plano, and Murphy. Scheduling is usually within a few days for standard installs, and we confirm the timing in writing. If you’re in one of these neighboring cities, call and we’ll tell you plainly when we can get out to your property.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Dallas

Fence installation means building a new fence line from the ground up, including setting posts, hanging panels, and installing gates; fence repair fixes an existing fence where the structure is still sound. Installation applies when posts are rotted, the layout is being changed, or you’re fencing a yard for the first time. Repair applies when the problem is localized to a post, gate, or panel section. We assess which you actually need before quoting.
Most residential fence installations in Dallas take one to three days depending on linear footage, material, and site conditions. A standard 150-to-200-foot wood or vinyl run is usually a one-to-two-day job for our crew. Larger properties, iron work, and complex gates take longer. We confirm the expected timeline in writing with your quote.
Fence installation in Dallas runs $3,500 – $9,000 for typical residential projects, with vinyl and aluminum at the higher end and wood or chain link toward the lower end. The exact price depends on footage, material, gates, and removal of any old fence. You get a written flat price before work starts, and we’ll review a competitor’s written quote at no charge. Call (833) 954-5327 for an exact quote; estimates are free.
Yes, we install commercial fencing for property boundaries, security lines, and enclosures. Commercial work is scoped and quoted with the same written price and written warranty as residential fencing. If your project crosses into driveway or site work, our home page shows the full range of trades we cover.
Yes. We install and repair wood, chain link, vinyl, aluminum, and iron fencing, and we work with the brands and specs on each job rather than pushing a single material. If you have a specific product in mind, tell us and we’ll confirm what’s available and what it costs. For a neighboring project, see Fence Installation in Mesquite.
Every fence we install carries the 365-Day Done Right Promise: if it isn’t done right, we make it right, backed by The Haven Standard with a written terms page, not a footnote. You also get a written warranty in hand at the final walkthrough. Our technicians have up to 19 years of experience, and the work is documented with a photo record from the visit.
Clear personal items, furniture, and plants away from the fence line, and unlock any gates the crew will need to access. Mark any sprinkler heads, buried lines, or irrigation you know of, and we’ll handle utility locate requests as part of the job. If your project also touches a driveway or entry, our Mesquite fence page and related work like home additions can be scoped separately. Call (833) 954-5327 with questions; estimates are free.
Schedule Your Fence Installation Service in Dallas Today
Get a written flat price before anyone picks up a tool. Rowan Construction Group Dallas installs and repairs fences across Dallas and the surrounding metro, with background-checked, uniformed technicians, a documented photo record on every visit, and a live person answering calls around the clock. Call (833) 954-5327 for your free, no-obligation estimate and a written scope you can compare.
Written by the team at Rowan Construction Group.












