







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Dallas
If you’re pricing a new fence in Dallas, the honest range for a typical residential job is $3,500 – $9,000, and the number moves most on lot access, post depth, and whether your block sits inside an overlay district. We’re Rowan Construction Group Dallas, and we work on the tight lots that make up so much of this city: East Dallas, Oak Cliff, the Knox-Henderson infill. That means we quote the site, not just the panels. Post holes on blackland clay are deeper than the catalogs assume, and on some Dallas properties the fence line itself needs resolving before anything gets dug. Call (833) 954-5327 and we’ll put a written price in front of you before a single post is set.
Why Rowan Construction Group Dallas Is Dallas’s Preferred Fence Installation Company

Rowan has delivered more than 4,000 projects since 2007, every one quoted with a flat written price and a written scope before work began. That discipline is what Dallas homeowners keep telling us they can’t find elsewhere here.
Our technicians have up to 19 years of experience, and crews are background-checked and uniformed. A live person answers calls 24/7. Every visit includes a documented photo record as a standard deliverable: what we found before we dug, and what the finished run looks like against the scope. In Dallas, where a neighbor’s fence sometimes overlaps yours by four inches, that photo record settles arguments later.
What we know about Dallas that matters to your quote: this is a demolition-and-rebuild city more than a remodel city, and the reasons apply directly to fences. Blackland clay swells and shrinks between wet springs and long dry summers. Infill lots in Lower Greenville and East Dallas shift use block to block, often without zoning to settle the question. That’s why we resolve the recorded line and the post depth before we quote, not after. Free second opinions on any written estimate you’ve already got, line by line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Dallas
Whether your Dallas property is a 1950s single-story ranch on pier-and-beam or a newer infill build, the fence has to survive the same clay. We work across wood, privacy, gates, chain link, vinyl, aluminum, iron, and commercial runs. Here’s where Dallas jobs usually start.
Wood Fence Installation in Dallas
Cedar and pine privacy runs are the most common ask in East Dallas and Oak Cliff, where homeowners want the yard closed off from a close neighbor or an alley. On the older blocks, we check the line against the recorded plat first, because clay heave has often shifted the previous fence out of square. Post holes get dug below the clay’s active zone with a properly sized concrete collar, not the shallow footings that fail within a season.

Privacy Fence Installation in Dallas
Dense infill means less side yard and more shared line, so privacy fences here are usually built tight against a party wall or alley easement. In Dallas, getting the height right matters: several neighborhoods have overlay restrictions on how tall a fence can stand at the front, and materials get reviewed in some historic blocks. We confirm that before ordering boards.

Fence Gate Installation in Dallas
Gate sag is the most common call we get, and it usually traces back to an undersized hinge post, not the gate itself. Our Fence Installation team sizes hinge posts heavier on driveway and side gates and sets them deep into the clay, so the swing holds through a wet spring and a dry summer without dragging.

Chain Link Fence Installation in Dallas
Chain link is still the practical choice for alley lines, side yards, and commercial lots, and it’s what a lot of Dallas properties want where the fence is functional rather than decorative. Galvanized and vinyl-coated runs both work here; the coating choice comes down to how much direct sun the run takes through a Texas summer.
Trusted Brands We Service in Dallas
We source from more than fifty vetted brands across the trades, and on the fencing side the materials come from established manufacturers we can price honestly rather than inflate. We don’t stock parts locally, and we won’t tell you we do. What we do instead is give you the brand and the spec in the written quote, so you can compare it against anything else you’ve been handed. On tight Dallas lots, the brand matters less than the post depth and the collar; we’re specific about both. Fast turnaround on standard privacy and chain link work once the line and permits are settled.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Dallas Homes
- Posts set too shallow in expansive blackland clay. Dallas soil swells in wet springs and shrinks through long dry summers, and fencing set in shallow concrete leans within a season or two. Gates then drag, and the fix is resetting the posts, not adjusting hinges.
- Property-line and party-wall disputes on dense infill lots. With large swaths of Dallas unzoned and lot lines shifting block to block, a fence installer has to resolve the recorded property line and any plat or overlay restriction before a post is set. That step matters far less in fully zoned suburban cities to the north.
- Historic or overlay-district height and material rules. Several Dallas neighborhoods review front-yard fence height and material, and a discovered restriction after the lumber is ordered turns into a signed change order. We check first.
- Gate sag from undersized hinge posts. The most common failure on Dallas properties is a light hinge post under a heavy gate. It’s a spec problem that shows up the first hot summer, and it’s avoidable at install.
On a tight Dallas lot, a fence job usually starts with a string-and-plumb line check against the recorded plat, because clay heave has often shifted the old fence out of square and neighbors in infill areas frequently dispute a few inches of line. The typical failure is posts in shallow concrete leaning within a season, plus gate sag where the hinge post was undersized. A qualified local pro pulls any required permits first, digs below the clay’s active zone, sets posts in a properly sized concrete collar, and walks the finished run against the scope on a punch list before calling for inspection sign-off.
Pricing for Fence Installation in Dallas, TX

A typical residential fence in Dallas runs $3,500 – $9,000. That range covers the whole job: line check, permits, post holes below the clay’s active zone, concrete collars, panels, gates, and the punch-list walk. What moves the number is lot access, the linear feet of run, the material, hinge-post sizing on gates, and whether an overlay district adds review to the schedule. Here’s the line-item detail:
| Service | Dallas price range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
Every Rowan quote is a flat written price with a written scope and a written warranty, delivered before any work starts. No change proceeds without your signature on a change order. Call (833) 954-5327 for a free estimate, and bring any competitor’s quote for a free second opinion, reviewed line by line.
We Also Serve Cities Near Dallas
We serve homeowners across the metro, including Mesquite, Balch Springs, Hutchins, and Garland, and we bring the same written-price discipline to every one. If you’re just outside the city line and wondering whether we cover you, call and we’ll tell you straight. You can read more about Fence Installation in Dallas here, and for the full service picture across all seven trades, our service hub has the detail.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Dallas

In most cases yes, a fence permit is required in Dallas, and some neighborhoods add overlay or historic review on top of it. The specific requirement depends on your block and the fence height, so we confirm it during the free estimate rather than guessing. Permits we pull are included in the written scope. Call (833) 954-5327 to schedule yours.
A tight lot raises the labor and the risk, so it raises the quote, honestly. Narrow side yards and shared party walls mean staging materials in the street, protecting landscaping, notifying neighbors, and working within the city’s noise and work-hour rules. Access like that shows up as a line in the written quote, not a surprise on the invoice. Call (833) 954-5327 for a free estimate that reflects your actual lot.
Because the posts were set too shallow in blackland clay, which swells in wet springs and shrinks in dry summers and pushes a shallow footing out of plumb. It’s a post-depth problem, not a wood problem. We dig below the clay’s active zone and set a properly sized concrete collar, so the lean doesn’t return. Call (833) 954-5327 for a free estimate on a reset.
You can, but the safe move is to confirm the recorded property line and get your neighbor’s agreement before posts go in. On dense Dallas infill lots, a few inches of line is exactly where disputes start. We check the plat and set the string line against the record, with the neighbor notified. Call (833) 954-5327 to schedule the estimate.
Cedar and vinyl both hold up well in Dallas sun, and aluminum and iron do well where you want durability and a lower-maintenance finish. The material matters less than the post spec and the footing depth in clay. We’ll name the brand and spec in the written quote so you can compare. Call (833) 954-5327 for a free estimate.
Ready for a written price on your Dallas fence? Call Rowan Construction Group Dallas at (833) 954-5327 for a free estimate. You’ll get a flat price with a written scope and a written warranty, a documented photo record of the visit, and the 365-Day Done Right Promise: if it isn’t done right, we make it right. No work starts until you’ve seen the number.
Written by the team at Rowan Construction Group Dallas.












