A Rowan company - serving Dallas, TX
A remodeled primary bathroom with a soaking tub and a walk-in shower

Vanities, Tile & Fixtures in Dallas, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Dallas
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Vanities, Tile & Fixtures in Dallas, TX

Vanities, tile and fixtures are the three surfaces you actually touch in a bathroom, and they drive most of what a remodel looks and feels like. A new vanity, a retiled shower floor and a set of Kohler or Toto fixtures can change a dated Dallas bathroom more than moving a single wall. Rowan Construction Group Dallas handles this work as its own scoped trade inside a full Bathroom Remodeling project, with a written flat price before anyone picks up a tool. Call (833) 954-5327 and we’ll walk you through what your bathroom needs.

Here’s what sets this apart from a handyman swap. Tile over a wet substrate only lasts if the membrane under it is right, and a vanity only sits level if the wall behind it is plumb. We inspect what’s under the surface before we quote, describe it in plain terms, and price the whole job around what we actually find. Our technicians have up to 19 years of experience, they’re background-checked and uniformed, and every visit ends with a documented photo record of what we found and what we did.

A tile setter installing wall tile in a shower

Key Takeaways

  • Most Dallas vanity, tile and fixture projects land between $3,800 and $14,500 depending on scope and material.
  • We quote a flat written price before work starts, under Clause 1 of The Haven Standard.
  • No change proceeds until you sign a change order, which keeps final cost within a few percent of the agreed number.
  • Substrate condition (the layer under your tile) is the single biggest cost variable in Dallas bathrooms.
  • Free second opinion on any competitor’s written estimate, reviewed line by line.

When You Need Vanities, Tile & Fixtures

Most of the calls we get in Dallas fall into a handful of recognizable situations. If any of these sound familiar, it’s worth a conversation.

  • Your tile is cracking or the grout is failing in the shower. In older East Dallas and Oak Cliff homes, we regularly see shower tile cracking because the original mud bed or substrate was never waterproofed to current standards. Cracking along a grout line often means water is already getting behind the tile, not just a cosmetic problem.
  • The vanity is water-damaged at the base. Dallas humidity plus a slow supply-line leak can rot a particleboard vanity cabinet from the inside out in a few years. If the toe kick is soft or the cabinet smells musty, the damage is usually worse than it looks.
  • You’re replacing fixtures but want to keep the tile. Swapping a toilet, faucet and shower trim without touching tile is a much smaller job, but it only works if the existing plumbing and tile are sound. We check before we promise.
  • You want a larger vanity or a double-sink layout. Moving a vanity from a 30-inch single to a 60-inch double usually means relocating supply and drain lines, which changes the scope and the price.
  • The grout is stained beyond cleaning and the tile is dated. When grout can’t be revived and the tile reads as 1998, a full re-tile with a modern format is often the right call rather than a patch.
  • You’re planning a full bathroom remodel and want this phase scoped separately. Sometimes the tile, vanity and fixtures are the whole job; sometimes they’re one piece of a larger project with layout changes and new lighting.
A new bay window with a cushioned seat

Our Vanities, Tile & Fixtures Process

We run this work the same way on every project, because the discipline is what keeps the price honest. Here’s what to expect.

  1. Walk the bathroom and document the existing condition. We photograph the substrate, the plumbing rough-in, the wall condition and the current fixtures. You get those photos as part of the record, so you see what we see.
  2. Write a flat price with a written scope. Under Clause 1 of The Haven Standard, the price is written before anyone starts. That means a dollar figure, the specific materials by brand and model, and a written warranty, not “call for a quote.”
  3. Confirm the substrate and waterproofing approach. For tile, that means a proper cement board or foam board with a bonded waterproof membrane (the layer that keeps water out of the wall and floor), not just tile over drywall. This is where a lot of Dallas bathroom failures start, and we won’t skip it.
  4. Set and install. Vanity goes in plumb and leveled, tile gets set with the right thinset for the substrate, and fixtures (Kohler, Toto, or whatever brand you’ve chosen from our vetted list) are installed to spec with the shutoffs and seals checked twice.
  5. Sign off on any change before it happens. If we open a wall and find rot, we don’t proceed until you’ve signed a change order with the new number. That’s the administrative step that keeps projects within a few percent of the agreed cost, across all 4,000-plus jobs Rowan has delivered.
  6. Document the finished work and hand over the warranty. You get the photo record of the completed install, the written warranty, and a single point of contact if anything needs attention inside the 365-Day Done Right Promise.

The 365-Day Done Right Promise means if something isn’t right, we make it right, and it’s backed by a terms page rather than an asterisk. Every trade we run, from home remodels to additions, carries the same written-price discipline.

Vanities, Tile & Fixtures Pricing in Dallas

Vanity, tile and fixture work in Dallas typically runs $3,800 to $14,500, with most full-bathroom versions of this scope landing in the $6,000 to $11,000 range. The spread comes down to square footage, tile choice, and how much substrate repair is hiding under the existing floor. Here’s a line-item breakdown with honest ranges.

Item Typical Dallas range Notes
Vanity replacement (single, stock cabinet) $850 – $2,200 Includes cabinet, top and one faucet; plumbing relocation adds cost
Vanity replacement (double, semi-custom) $2,400 – $5,800 Double sink rough-in and larger countertop
Floor tile install (per sq ft) $9 – $22 Includes thinset and grout; substrate prep billed separately
Shower wall tile install $2,200 – $6,500 Depends on tile format and whether a membrane system is added
Waterproofing membrane $400 – $1,200 Bonded sheet or liquid membrane over cement or foam board
Fixture package (toilet, faucet, shower trim) $650 – $2,800 Kohler and Toto sit mid to high; trim brand and finish drive cost
Substrate repair (rot, old mud bed removal) $600 – $2,400 Only when found; priced by scope, signed before we proceed

What affects the number most: whether we’re re-tiling over existing substrate or tearing down to studs, whether plumbing lines need to move, tile format (large-format porcelain and natural stone cost more to set than standard ceramic), and whether you’re choosing stock or semi-custom cabinetry. We source from a list of more than fifty vetted brands, including KraftMaid and Wellborn cabinets, Cambria and Caesarstone countertops, and Kohler and Toto fixtures, so the written quote reflects real material prices rather than inflated ones.

Bring a competitor’s written estimate and we’ll review it line by line at no charge. That’s the Free Second Opinion standing offer, and it’s useful even if you don’t hire us. Call (833) 954-5327 for a free estimate and a written price you can compare.

What about less common materials?

Some Dallas bathrooms include specialty glazing or window film that interacts with the tile and fixture layout, and we’ll coordinate with suppliers like CGI or CWS where a window or enclosure is part of the scope. If the job is a simple vanity and fixture swap, none of that comes into play, and the quote reflects that.

FAQs – Vanities, Tile & Fixtures

How much does a bathroom vanity and tile replacement cost in Dallas?

Most Dallas vanity and tile replacement projects run $3,800 to $14,500, with the typical job landing between $6,000 and $11,000. The final number depends on vanity size, tile square footage, tile material, and whether substrate repair is needed. Call (833) 954-5327 for a free estimate with a written flat price.

Can you replace a vanity without redoing the whole bathroom?

Yes. A vanity swap alone is one of the most common jobs we run, and it usually takes a day or two if the plumbing rough-in doesn’t need to move. The catch is the floor: if the old vanity sat on tile that ran under it, a differently sized replacement leaves a gap you’ll need to fill, and we price that up front rather than after the cabinet comes out.

Is it worth re-tiling a shower in Dallas or replacing it?

Re-tiling is usually worth it when the shower pan and framing are sound and the failure is cosmetic or confined to the wall tile. If the pan is leaking or the framing has rot, replacing more of the assembly is the honest answer, and we’ll tell you which one you’re facing after we open the wall and photograph the condition. Either way, the price is written before we start, and the change order comes before any extra work.

How long does tile installation take?

Floor tile in a standard Dallas hall bath typically takes two to three days including prep and cure time, and a full shower wall re-tile runs three to five days. Large-format tile and natural stone take longer because of layout and cutting. We’ll give you a schedule with the written quote so you know what your week looks like.

If you’re managing a larger project and want to see how this phase fits with layout changes and new lighting, the Bathroom Remodeling in Dallas page walks through the full sequence. We also handle the wider set of trades that Dallas homes need, so a vanity, tile and fixture job doesn’t have to be handled by three separate contractors. Calls are answered by a live person 24/7, technicians arrive background-checked and uniformed, and every visit includes a documented photo record as a standard deliverable. Call (833) 954-5327 for a free estimate on your Dallas bathroom.

Written by the team at Rowan Construction Group Dallas, serving Dallas.

Getting started with Rowan in Dallas

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Dallas team

A local vetted partner works across Dallas and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Dallas? Licensed & insured · free written estimates
Call (833) 954-5327
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Rowan Construction Group Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch