







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterSmall & Partial Kitchen Remodels in Dallas, TX
A small or partial kitchen remodel in Dallas typically runs $9,000 to $38,000, depending on how much of the room you touch. This is the work between a cosmetic refresh and a full gut: new cabinet boxes and doors on existing layout, a countertop and backsplash swap, a reworked island, or replacing a failing appliance run without moving plumbing or gas. Most of these projects finish in two to five weeks, and the price is written down before anything gets demoed.
We run this work as part of our Kitchen Remodeling in Dallas trade, which means the same Haven Standard applies whether you’re replacing one run of cabinets or reworking the whole room. Under Clause 1, the price is written before anyone starts. No change proceeds until the change order is signed. That discipline is why a partial kitchen doesn’t quietly turn into a full one on your invoice.
Call (833) 954-5327 for a free estimate. A written price comes back before you commit to anything.

When a Partial Kitchen Remodel Is the Right Call
Most Dallas kitchens built or updated between 2005 and 2022 are structurally fine. The cabinets are solid, the plumbing works, the layout functions. What’s dated is the surface: the honey-oak boxes, the 4-inch granite backsplash, the almond appliances. A partial remodel targets what’s failing or dated without paying to move walls you don’t need moved.
Here’s what we hear most from homeowners in the metro core and inner suburbs:
- The cabinet doors are shot but the boxes are sound. Refacing or replacing doors and drawer fronts on a stable carcass saves thousands over new cabinetry and usually takes under a week.
- The countertop is chipped, stained, or the wrong scale. A countertop swap is one of the highest-value partial remodels. We source Cambria and Caesarstone slabs; you’ll see the slab before we cut it.
- One run of cabinets fails while the rest is fine. Water damage under the sink, a sagging run over the range, a cabinet that no longer closes. We replace the failing section and match the rest.
- The island doesn’t work. Storage that opens the wrong way, no seating overhang, a surface too small to prep on. Rebuilding an island is a defined, contained job.
- You’re prepping to sell and need the kitchen to read as updated. Buyers walk the kitchen first. A partial remodel that updates surfaces and lighting moves the room’s perceived condition without a full gut.
- The lighting is the problem. Under-cabinet lighting, a dated fluorescent box, no task lighting over the sink. This is an electrical job done by a licensed electrician, not a handyman with a drill.
What Affects the Price of a Partial Kitchen Remodel in Dallas
Three things move the number more than anything else: whether cabinets are refaced or replaced, whether the countertop material is engineered quartz or natural stone, and whether you’re changing the layout. Refacing a full kitchen typically lands $4,500 to $9,000. Replacing cabinet boxes runs $8,000 to $18,000 for a mid-size kitchen. A quartz countertop for a typical Dallas kitchen measures around 30 to 45 square feet and runs $3,200 to $7,500 installed, depending on the slab and edge profile.
Layout changes cost more because they cascade: moving a sink means moving the drain and supply lines, which means a plumber and a permit. Keeping the layout is the single biggest lever on a partial kitchen budget. If you can live with where the sink sits, you save real money.

Why an Independent, Documented Process Matters on a Small Job
Small remodels are where sloppy contractors hide. A partial kitchen is often a two-week job, and homeowners don’t always insist on the same paperwork they would for a full gut. That’s the gap we close. Every project, no matter the size, gets a flat written price and a written scope before work starts. You’ll get a written warranty, and a documented photo record on every visit, so you know what was found and what was done. Our technicians have up to 19 years of experience and are background-checked and uniformed.
We also invite you to bring any competitor’s estimate to us for a Free Second Opinion. We’ll review it line by line at no charge. That’s not a sales tactic; it’s how you decide whether the scope you were quoted is honest.
If you want to see how this fits the larger picture, our Kitchen Remodeling page covers full-scope work, and our home page lays out the seven trades and the Haven Standard.
Our Partial Kitchen Remodel Process
- Walk-through and measurement. We measure the room, note the condition of the cabinets, substrate, and existing plumbing and electrical, and take photos. You get a written scope and a flat written price. Free estimate.
- Material selection and slab view. You choose doors, slab, backsplash, hardware, and lighting. We source through our vetted brands: KraftMaid and Wellborn for cabinets, Cambria and Caesarstone for countertops, Kohler and Toto for fixtures. You see the actual slab before cutting.
- Permits and pre-construction. If we’re moving plumbing, gas, or electrical, we pull the permit and schedule the licensed trades. A signed change order covers any scope change before it happens.
- Demolition and protection. Floors, adjacent rooms, and appliances are protected. Debris is hauled out. Photos document the condition of the substrate and walls before new work goes in.
- Installation. Cabinet and countertop crews work in sequence. Electrical and plumbing finalize. We document every stage with photos you receive.
- Final walkthrough and sign-off. We walk the room with you, confirm the scope is complete, and leave you with the written warranty. The 365-Day Done Right Promise applies: if it’s not done right, we make it right.
Small & Partial Kitchen Remodel Pricing in Dallas
Here are the ranges we see on Dallas jobs. These are line-item numbers for the work itself, not markup on supplies. Actual numbers depend on cabinet run length, slab choice, and whether permits are required.
| Scope | Typical Range (Installed) | Timeline |
|---|---|---|
| Cabinet refacing (doors, fronts, hardware) | $4,500 – $9,000 | 4 – 7 days |
| Cabinet box replacement, same layout | $8,000 – $18,000 | 1 – 2 weeks |
| Quartz countertop (30 – 45 sq ft, installed) | $3,200 – $7,500 | 5 – 10 days |
| Backsplash (tile, 20 – 35 sq ft) | $900 – $2,400 | 2 – 4 days |
| Island rebuild (cabinet + counter) | $3,500 – $8,500 | 1 – 2 weeks |
| Under-cabinet and task lighting (licensed electrician) | $800 – $2,200 | 1 – 2 days |
| Combined partial kitchen remodel (multiple items) | $9,000 – $38,000 | 2 – 5 weeks |
Two things affect where you land on these ranges. First, the age and condition of what’s behind the cabinets. We’ve opened walls in older Dallas homes and found galvanized plumbing and knob-and-tube wiring that predated the last remodel. If that’s there, we stop, document it with photos, and write a change order before touching it. Second, slab pricing on natural stone moves with availability. Engineered quartz from Cambria is more stable; a rare Caesarstone colorway can run higher.
For homeowners planning a partial remodel alongside other work, our guides on bathroom remodeling in Dallas, roofing in Dallas, and windows and doors in Dallas explain how those trades price and schedule.
How Long Does a Partial Kitchen Remodel Take in Dallas?
Most partial kitchen remodels finish in two to five weeks from first demo to final walkthrough. A cabinet refacing or countertop swap alone is often done in under a week. The longer timeline comes in when you combine cabinet replacement, a new slab, backsplash, and lighting, because the trades sequence rather than overlap. Permitted plumbing or electrical work adds inspection scheduling time, usually a few days per inspection.
Do You Need a Permit for a Partial Kitchen Remodel in Dallas?
You need a permit for any work that moves plumbing, gas, or electrical; cosmetic work like refacing, new cabinet doors, and countertop replacement does not require one. Dallas permits for kitchen work go through the city’s building department, and if you’re in a neighborhood with its own overlay, additional review can apply. We handle permits as part of the written scope, so the permit line item appears on your quote, not in a surprise call six weeks later.
Can You Match New Cabinets to Existing Ones?
Yes, in most cases. We source through KraftMaid and Wellborn, who both carry profiles designed to match common existing cabinet styles. We measure the existing doors, drawer fronts, and stiles and match finish, style, and hardware. If a perfect match isn’t available, we’ll tell you up front and quote a partial refacing of the adjacent run so the room reads consistently, rather than installing one odd-looking section.
Is It Cheaper to Refinish or Replace Kitchen Cabinets in Dallas?
Refinishing or refacing is almost always cheaper than replacing cabinet boxes and runs $4,500 to $9,000 versus $8,000 to $18,000 for box replacement. Refacing keeps the existing carcass, which is the expensive part to build, and changes only what you see. It’s the right call when the boxes are square, the drawers slide, and the shelves aren’t sagging. When the boxes are failing, refacing is money spent on a bad foundation. Call (833) 954-5327 and we’ll give you a written assessment of which applies to your kitchen.
What Parts of a Dallas Kitchen Get Remodeled Most Often?
In Dallas, the countertop, the backsplash, and the cabinet doors lead the list. Countertops account for most partial-remodel spending because engineered quartz has become the expected standard, and Cambria and Caesarstone slabs are widely available in the metro. Backsplashes follow, often in a subway or zellige tile, and cabinet refacing closes the gap. The reason is simple: these three surfaces are what the eye reads first when someone walks into the room, and they carry the visible age of a kitchen that’s structurally sound.
What About Appliances and Fixtures?
If you’re replacing appliances, we coordinate the install and make sure the electrical and gas connections are done by licensed trades. We source fixtures through Kohler and Toto, and we’ll confirm clearances and hookup locations before ordering so nothing arrives that won’t fit. We don’t sell appliances; we install what you choose and coordinate with the vendor if a delivery or fit issue comes up.
Neighborhood Examples
We see a lot of partial kitchen work in the older homes of Lakewood and East Dallas, where kitchens were updated in the 1990s and the cabinet boxes are still solid but the doors and counters are dated. In Oak Cliff, we see more mid-century layouts where an island rebuild or a lighting upgrade does more for the room than new cabinets would. In Plano and Frisco, the kitchens are newer and the work is more often a countertop and backsplash swap to move the finish from builder-grade to something the room deserves. Each of those situations prices differently, and we quote them separately. Our home additions in Dallas and fence installation in Dallas teams work in the same neighborhoods if your project extends outside the kitchen.
FAQs – Small & Partial Kitchen Remodels in Dallas
How much does a small kitchen remodel cost in Dallas?
A small or partial kitchen remodel in Dallas typically costs $9,000 to $38,000 installed, depending on how many surfaces you touch. A single-item job like a countertop swap runs $3,200 to $7,500. Call (833) 954-5327 for a written price on your specific kitchen; estimates are free.
Can you remodel just part of my kitchen?
Yes. Partial remodels are most of what we do on smaller kitchen jobs, and they cover cabinet refacing, cabinet box replacement on an existing layout, countertop and backsplash swaps, island rebuilds, and lighting upgrades. We scope the work to what’s actually failing or dated rather than upselling a full gut. Call for a walk-through and a written scope.
Do I need permits for a partial kitchen remodel in Dallas?
You need permits for any plumbing, gas, or electrical changes in a Dallas kitchen remodel. Cosmetic work like refacing, new cabinet doors, and countertop replacement doesn’t require one. We pull permits as part of the written scope, so the line item is on your quote from the start. Call (833) 954-5327 to talk through what your project needs.
How long does a partial kitchen remodel take?
Most partial kitchen remodels in Dallas finish in two to five weeks, and a single-item job like a countertop or refacing runs under a week. The timeline stretches when you combine cabinet replacement, a slab, backsplash, and lighting, because the trades sequence. Call for a written schedule with the price.
Can you match new cabinets to my existing ones?
In most cases, yes. We source KraftMaid and Wellborn profiles designed to match common styles, and we measure existing doors, fronts, and finish before quoting. If a perfect match isn’t available, we’ll say so up front and quote a partial refacing of the adjacent run instead. Call (833) 954-5327 for a match assessment.
Is it cheaper to reface or replace my kitchen cabinets in Dallas?
Refacing is almost always cheaper, at $4,500 to $9,000 versus $8,000 to $18,000 for box replacement. It’s the right call when the boxes are sound and the drawers work. If the carcass is failing, refacing is money spent on a bad foundation. Call for a written assessment of which applies to your kitchen.
Get a Written Price on Your Dallas Kitchen Remodel
Here’s how this works: you call, we walk the kitchen, we measure, and we hand you a flat written price with a written scope before anything is demoed. If a competitor has already quoted you, bring it and we’ll review it line by line at no charge through our Free Second Opinion. You’ll know whether their scope is honest before you sign, and you’ll know whether ours is too.
Every job carries the 365-Day Done Right Promise and includes a documented photo record on every visit, not as an add-on. The cabinets, counters, and fixtures we install come from a vetted pool of fifty-plus brands, so the quote reflects real material costs rather than inflated ones.
Call (833) 954-5327 for a free estimate. A live person answers, and the written price follows the walk-through.
Written by the team at Rowan Construction Group Dallas, serving Dallas.


