







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCost to Reface Kitchen Cabinets in Dallas, TX: What the Number Actually Depends On
Refacing a Dallas kitchen runs roughly $4,000-$8,000 for a standard 10×10 layout, so a full cabinet reface plus new countertops and a backsplash typically lands between $14,000 and $45,000 once the whole kitchen is brought back together. That number only holds if the cabinet boxes are still square, and in a 1960s Oak Cliff ranch sitting on blackland clay, box condition is the first thing to verify, not the last. Call (833) 954-5327 for a written price and a free second opinion on any estimate you already have.
What follows is the honest version of refacing pricing in Dallas: what moves the number, what can sink it, and when refacing is the wrong spend entirely. We put every number in writing before anyone picks up a tool, because a written quote with itemized line costs is the only way to see whether refacing is a fit for your boxes.

Why Dallas Kitchen Refacing Quotes Need a Box Inspection First
Dallas is a demolition-and-rebuild city more than a remodel city. No-zoning swaths, blackland clay that swells through wet springs and shrinks through long dry summers, and lot-by-lot infill mean the housing stock is a mix of post-war 1950s and 60s single-story brick ranches on pier-and-beam or shallow slab and fast-turnover 2000s tract homes in the northern arc. The older stock is where refacing gets interesting.
Here’s the operator detail most quotes skip: a box frame that has racked over decades on clay doesn’t announce itself. It looks fine with the old doors on. Pull the doors and check the face-frame corners against a square, and in a 1950s East Dallas or Oak Cliff ranch you’ll often find the frame out of plumb by a quarter inch across the cabinet run. Put new Wellborn or KraftMaid doors on a frame like that and they’ll bind or gap within a season. That’s not a refacing problem, it’s a foundation problem showing up in your kitchen.
After a dry Texas summer, contractors in East Dallas and Oak Cliff get a wave of calls about sticking doors and diagonal drywall cracks. The fix is usually piers under the slab, not patching the drywall, and it’s the exact condition that will rack a fresh set of refaced doors. So we check the boxes before we put a number in writing. If the frame is out of square, you’ll know why before you’ve spent a dollar.
What Refacing Actually Costs in Dallas, Line by Line
Two tiers of refacing, and the price difference is mostly in the doors. Veneer-only refacing keeps your doors and lays a new veneer and edge banding over the boxes and frames. Door-and-drawer-replacement refacing swaps the fronts for new doors in Wellborn or KraftMaid and is what most Dallas homeowners actually want. Here’s the written pricing we use for a standard 10×10 kitchen:
| Refacing scope | Dallas price range |
|---|---|
| Veneer-only refacing (keep existing doors) | $4,000-$6,500 |
| Door-and-drawer-replacement refacing (Wellborn or KraftMaid doors) | $6,500-$9,500 |
| Countertop installation (paired with a reface) | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Cabinet installation (new boxes, if refacing is wrong) | $4,000-$13,000 |
| Full kitchen remodel range | $14,000-$45,000 |
For context, the wider Kitchen Remodeling in Dallas range of $14,000-$45,000 is what a reface turns into once countertops, a backsplash and any layout work come into the picture. A reface on its own is a smaller job; the whole-kitchen number is what most people end up spending because the cabinets are rarely the only tired thing in a 1960s kitchen.
What moves the number
- Linear feet of cabinetry – a 12-foot run and an 18-foot run are not the same job. More boxes, more doors, more labor.
- Door style and material – a flat slab door in a stock KraftMaid color costs less than a five-piece shaker in a custom finish.
- Hardware – new pulls and knobs are a small line, but soft-close hinges and drawer slides add up across 20-plus doors.
- Box condition – any repair to a soft or water-damaged box is quoted as a separate line, not folded into the base number.

The Refacing Breakeven: When It’s the Wrong Spend
Refacing is the right call when the boxes are solid and the layout already works. It’s the wrong call in two situations. The first: when more than about 30% of the boxes show damage, soft wood or water staining, you’re paying to put expensive fronts on a failing frame, and new boxes are the honest answer. The second: when you’re changing the layout itself. If a wall is moving, if the sink or range is relocating, you’re into a full Kitchen Remodeling project, and refacing a kitchen you’re about to reconfigure is money you won’t get back.
When boxes are sound and the layout stays, refacing is the cheapest way to a kitchen that reads as new, and a brand-name install with Wellborn or KraftMaid doors holds its value better than a slab of new paint. If you’re not sure which side of that line you’re on, that’s exactly the question a written estimate should answer without pressure to buy anything. Bring a competitor’s quote and we’ll review it line by line at no charge, because a second opinion on a $9,000 reface is worth a phone call.
What a Written Refacing Quote Looks Like in Dallas
We put the price in writing before any work starts, with an itemized scope and a written warranty, so the number on the page is the number you pay. That matters most in a kitchen because refacing quotes in Dallas sometimes come in low and grow once the walls open and the box condition shows up. Our standard is that no work proceeds on a change until the change order is signed, which is the discipline that keeps a project within a few percent of the agreed cost.
A few Dallas specifics that belong in the quote, not discovered mid-project:
- Permits: refacing alone usually doesn’t require a permit in the City of Dallas for a single-family home, but moving electrical or plumbing to accommodate a new layout does, and the permitting line belongs in the written quote.
- Box condition: the square-and-plumb check is stated in the quote so you know whether the number includes frame repair.
- Photo record: every visit includes a documented photo record as a standard deliverable, so you can see the box condition we found before the new doors went on.
Crews are background-checked and uniformed, our technicians have up to 19 years of experience, and a live person answers calls 24/7. Every project is backed by our 365-Day Done Right Promise, which is printed on the quote, not tacked on as an asterisk. Refacing is one trade in seven for Rowan Construction Group Dallas, and the same written-price discipline applies whether we’re refacing a kitchen, roofing a house or pouring a paver driveway. You can start from our home page and see the rest.
FAQs
Refacing a standard 10×10 kitchen in Dallas runs about $4,000-$6,500 for veneer-only refacing and $6,500-$9,500 for door-and-drawer-replacement refacing with Wellborn or KraftMaid doors. Countertops ($2,000-$6,500) and a backsplash ($800-$2,500) are usually added to the same job. Call (833) 954-5327 for a written price on your kitchen – estimates are free.
Repairing and refacing is usually cheaper than full replacement, and it’s the right call when the boxes are sound and the layout stays. Once more than 30% of the boxes show damage, or the layout is changing, new cabinet installation ($4,000-$13,000) makes more financial sense than putting new doors on a failing frame. Call us and we’ll tell you honestly which side you’re on.
In most cases yes, and a live person answers calls 24/7 at (833) 954-5327. The box inspection is the first step, and it’s what lets us put a written price in front of you rather than a range. Free second opinion on any estimate you already have.
Refacing alone usually doesn’t require a permit for a single-family home in the City of Dallas. If you’re moving electrical or plumbing to accommodate a new layout, that work does require a permit, and it belongs in the written quote up front rather than surfacing mid-project.
If you’ve been putting off a refacing decision because you don’t know what it costs, start with the written number: call (833) 954-5327 for a free estimate and a box-condition assessment. We’ll tell you what we found, what it means, and what a reface actually costs in your Dallas kitchen before any work begins.
Written by the team at Rowan Construction Group Dallas, serving Dallas, TX.
What Our Customers Say
"They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O.












