







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose Toto Construction
We provide independent Toto construction and repair service across Dallas, TX, from a running Drake toilet to a full bathroom or kitchen remodel built around Toto fixtures. Our technicians have up to 19 years of experience with Toto’s flush systems, fill valves, and bidet seats, and we quote the fix before anyone picks up a tool. Rowan Construction Group Dallas is an independent service provider, not affiliated with, endorsed by, or authorized by Toto. Call (833) 954-5327 for a free written estimate.
Why Trust Rowan Construction Group Dallas for Your Toto Construction?

We work on Toto fixtures every week as an independent remodeling contractor, not a Toto dealer or authorized agent. That independence keeps our advice honest: we quote Toto toilets and Washlets on their real repairability instead of steering you toward a replacement you don’t need.
Every job starts with a written flat price, a written scope, and a written warranty before work begins. Under Clause 1 of the Haven Standard, no work proceeds on a change until the change order is signed. That discipline is why our projects finish within a few percent of the number you agreed to.
Toto’s fill valves, flappers, and waxless adapters are built to tight tolerances. Put a cheap flapper in a Drake and you’ll cut its flush performance and start a slow leak. We spec genuine Toto parts for the components where it counts and quality aftermarket only for supply lines and seat hardware. A toilet with a sound bowl and tank is usually worth repairing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Dallas
Dallas’s blackland clay moves foundations, and that movement reaches your bathroom. Older single-story ranches in East Dallas and Oak Cliff sit on pier-and-beam or shallow slab over expansive clay, so a floor that shifts will shift the flange and the bowl set on it. Here are the Toto issues we see most.
- Drake G-Max flapper wear (CST743, CST776). The G-Max flapper softens and stops sealing, so the toilet runs and refills on its own. A homeowner usually notices it as a rising water bill before they notice the sound.
- Fill valve scaled by hard water (TSU99A series). Dallas tap water leaves mineral buildup on the fill valve that slows the refill rate. The bowl never quite fills right and the valve keeps ticking long after a normal flush.
- UniFit waxless adapter leaks after floor changes. When tile or new flooring raises the closet flange height, the UniFit adapter seal stops seating fully. The result is a seep at the base that travels into the subfloor before it shows.
- Washlet wand and solenoid failure. Hard water clogs the wand nozzle and the internal solenoid, so a Washlet+ seat sprays weak or not at all. It’s a water-quality problem, not a dead seat.
- One-piece Ultramax II tank-to-bowl gasket seepage. The gasket where the tank meets the base on the Ultramax II can weep slowly. You’ll see a ring of moisture at the joint or smell the room, without a puddle that points to the cause.
Toto Parts & Our Repair-vs-Replace Approach

We spec genuine Toto fill valves, flappers, and UniFit adapters because the tolerances on the G-Max and Tornado flush systems are tight. Cheap aftermarket parts cut flush performance and leak. Quality aftermarket is fine for supply lines and seat hardware, where tolerances are looser.
We don’t claim a stock of Toto parts on hand. Parts are sourced per job to match your model and series, which is why a Toto service call is worth a first look rather than a rushed swap. The repair-versus-replace call is honest: a Toto toilet with a sound bowl and tank gets repaired; a cracked bowl or failed base gets replaced.
Call (833) 954-5327 for a free written estimate, and bring any competitor quote for a free second opinion reviewed line by line.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We pull the tank lid, check the flush tower and fill valve, confirm the model, and test the flush. We also check the flange and adapter seal where floor height may have changed.
- 2
Repair or install. We fit the correct Toto valve, flapper, or UniFit adapter and set the refill level. For remodels, we plan tile and floor height so the closet flange ends up where it belongs.
- 3
Test. We run full flush cycles, verify refill level and seal, and photograph what we found and what we replaced. That photo record is standard, not an add-on.
- 4
Warranty. You leave with a written warranty and the 365-Day Done Right Promise: if it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Dallas
We service the whole Toto line a Dallas owner is likely to have, from two-piece workhorses to smart seats. That includes the Drake pair (CST743 and CST776), the Ultramax II one-piece, the Vespin II and Aquia dual-flush, and the Neorest and Washlet+ bidet seats. On remodels, we set the Toto fixture into the new layout so the flange, floor, and supply line all line up.
We Also Service These Brands
Rowan Construction Group Dallas works across fifty-plus vetted brands, so your Toto fixture sits inside a project that also handles KraftMaid cabinets, Kohler fixtures, GAF roofing, and PGT windows without handing you off to a separate contractor. A bathroom built around Toto finishes cleanly next to the cabinets, counters, and lighting that complete the room.
FAQs – Toto Construction Service in Dallas

It can almost always be repaired. A Drake that refills on its own usually has a worn G-Max flapper or a scaled fill valve, not a failed toilet. We replace the part with the correct Toto component and test the flush. Call (833) 954-5327 for an exact quote; estimates are free.
Yes, if the new floor raised the closet flange height, the waxless UniFit adapter needs to be matched to the new gap. Re-seating with the wrong adapter or just tightening the bolts leads to a seal leak at the base. We set the bowl so the adapter seats fully.
Usually yes. A working Neorest or Washlet+ seat is worth keeping through a remodel if the plumbing and power stay in place. We plan the layout around it so the seat, supply, and outlet survive the new tile.
Hard water in Dallas leaves mineral buildup on the TSU-series fill valve, which slows the refill rate. Replacing the valve restores normal fill. Call (833) 954-5327 for a free written estimate.
Often, yes. A tub-to-shower conversion doesn’t move the toilet unless the layout changes, and we plan the new shower and floor height so the existing flange and Toto toilet stay put.
Pricing depends on scope. A repair is a small part of the total; the figures below are the ranges we quote in Dallas for the work Toto fixtures usually sit inside. Every price is written before work starts.
| Service | Price Range (Dallas) |
|---|---|
| Full Bathroom Remodeling | $9000 – $28000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Walk-In Shower Installation | $4500 – $12000 |
| Bathroom Vanity Installation | $800 – $3000 |
| Full Kitchen Remodeling | $14000 – $45000 |
Call (833) 954-5327 for an exact quote on your project; estimates are free, and so is a second opinion on any written estimate you already have.
Book Your Toto Service in Dallas, TX
Whether you need a Drake repaired, a Washlet brought back to life, or a full bathroom or kitchen remodel built around Toto fixtures, we’ll put the number in writing before work starts. Call Rowan Construction Group Dallas at (833) 954-5327 for a free estimate.
Written by the team at Rowan Construction Group.












