







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose PGT Construction
Rowan Construction Group Dallas is an independent PGT service provider, not affiliated with or authorized by the manufacturer. We install and repair PGT windows and doors across Dallas using OEM parts when they exist and code-compliant methods on every job. What sets our PGT work apart is the written price before anyone touches your house, a documented photo record when we leave, and technicians who know how a WinGuard® unit behaves after eight Dallas summers.
Dallas is a demolition-and-rebuild market more than a remodel market, and that shapes how PGT work gets done here. Blackland clay heaves foundations, infill tear-downs move lot by lot through Knox/Henderson and Lower Greenville, and a 1950s brick ranch can sit on the same block as a 2019 two-story build. A window that racked on a shifting slab is a different repair from a window that failed at the sill. We diagnose which one you have before naming a number.
Call (833) 954-5327 to schedule a free estimate.
Why Trust Rowan Construction Group Dallas for Your PGT Construction?

Our technicians have up to 19 years of experience, and that experience is specific. PGT makes several distinct product families, and each one fails in its own way. The 700 Series aluminum frame behaves nothing like a Sentinel® vinyl frame under Dallas heat, and a WinGuard® impact unit has a laminated glass make-up that needs a different installation method than a standard insulated unit. We train on those differences rather than treating every window as a rectangle with glass in it.
Parts matter more than homeowners expect. PGT uses proprietary roller assemblies and lock hardware on its sliding glass doors, and a generic replacement roller that fits “close enough” will bind within a season. We source OEM PGT components for critical parts when they’re available so your warranty stays intact. When OEM stock isn’t obtainable, we use aftermarket equivalents that meet or exceed the original specification and we tell you which you’re getting.
Warranty-safe service means documentation. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and every visit includes a photo record of what we found and what we did. If you ever need to make a warranty claim with PGT, you have dated images of the condition and the repair. That’s the record a manufacturer asks for.
We’re licensed and insured, we pull permits where Dallas requires them, and we back the work with the 365-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Dallas
Dallas weather tests window and door products in a way milder climates don’t. Hot, humid summers sit between hard freezes, and the thermal cycling alone wears out seals faster here than the manufacturer’s general guidance suggests. Add blackland clay movement and you get failures that look like product defects but are often installation or substrate issues. Here are the five we see most.
- Failed weatherstripping on WinGuard® impact windows. The bulb seals compress and harden after several years of Dallas sun, and water starts seeping around the frame during a hard storm, usually on the windward side. This is the single most common PGT call we get, and it’s a seal problem, not a glass problem. Replacing the weatherstripping and resealing the frame restores the unit.
- Fogging in Sentinel® insulated glass units. When the edge seal fails, moisture gets between the panes and the glass goes cloudy. Sentinel® vinyl units from older installations are especially prone to it because the spacer system degrades with thermal cycling. The frame is usually fine; the insulated glass unit itself needs replacing.
- Binding rollers and corroded tracks on PGT sliding glass doors. Heat, humidity and grit collect in the bottom track, and the rollers seize or flat-spot. A door that takes two hands to slide is usually a roller and track problem, not a frame problem. Cleaning alone rarely fixes it once the roller has worn.
- Laminate delamination on impact glass. WinGuard® units have a laminated interlayer, and after years of Dallas heat the edge seal can fail and the laminate can begin to separate. You’ll see a milky haze or a visible edge line. Once delamination starts, the impact rating is compromised and the unit should be replaced.
- Racked frames from foundation movement. When blackland clay heaves, a window frame can go out of square and the sash starts sticking or the lock stops lining up. Patching drywall won’t fix it. The real fix is usually piers under the slab, and we’ll tell you honestly when a window problem is actually a foundation problem.
Here’s how this usually plays out in practice. A homeowner notices water seeping around the frame of a PGT WinGuard® window during heavy rain, especially on the windward side. Inspection often reveals deteriorated weatherstripping or a failed seal at the sill, common after years of Texas sun and storms. A qualified technician typically replaces the weatherstripping and reseals the frame, and if the glass seal has failed, may recommend replacing the insulated glass unit to restore performance.
PGT Parts & Our Repair-vs-Replace Approach

We source PGT parts per job, not from a stocked shelf. That means we confirm the exact model and series before ordering, because a Sentinel® sash lock is not the same part as one for a 700 Series aluminum unit, and the wrong part is worse than a delay. For rollers, locks, weatherstripping and hardware we go OEM first to keep your warranty compliant. When OEM stock isn’t available, we use aftermarket parts that meet or exceed the original spec and we tell you exactly what you’re getting.
Repair versus replace is a judgment call we make honestly, and it depends on three things: the age of the unit, whether the problem is one part or the whole assembly, and whether it’s recurring. A fifteen-year-old Sentinel® window with a single failed sealed unit is usually worth repairing. The same window with three failures and racked frames is usually telling you the installation or the substrate is the problem, and replacement with correct flashing and sealing is the cheaper long-term answer. We’ll show you the photo record and give you both numbers.
Bring us a competitor’s written estimate and we’ll review it line by line at no charge. Call (833) 954-5327 for a free second opinion or a free estimate on your PGT work.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the unit, identify the exact PGT series and model, and photograph the failure point. For a water intrusion call we check the weatherstripping, the sill seal, the flashing and the frame square in that order, because the visible leak is rarely where the water enters.
- 2
Written scope and price. Before any work starts you get a flat written price with a written scope and a written warranty. No change order moves forward without your signature, which is the discipline that keeps projects within a few percent of the agreed number.
- 3
Repair or install. OEM PGT parts where available, sealed and flashed to Dallas code, and on impact window installation the frame is set and shimmed so the glass isn’t carrying structural load.
- 4
Test and document. We operate every sash, lock and roller, water-test where the installation calls for it, and hand you the photo record of the work. Then the 365-Day Done Right Promise applies: if it’s not right, we make it right.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Dallas
We work across the PGT window and door families: WinGuard® Impact-Resistant Windows and Doors, Sentinel® by PGT® Vinyl Windows, the PGT® Aluminum Series including the 700 Series, and PGT® Sliding Glass Doors. Our highest-volume PGT work in Dallas is impact window installation, window replacement and roof repair around window openings where leaking has damaged sheathing or flashing. On the roofing side we handle the repair that follows a window-related leak, since water intrusion at a frame often means the flashing above it has failed too. We don’t stock product; every unit and part is ordered to the specific job after diagnosis.
We Also Service These Brands
PGT is one of more than fifty vetted material brands we work with, so you’re not getting a single-brand answer to a multi-brand house. Alongside PGT we service KraftMaid cabinets, Kohler fixtures, GAF roofing and Master Halco fencing. If your project needs a window replaced and the roof around it repaired, that’s one written scope and one crew standard.
FAQs – PGT Construction Service in Dallas

Is Rowan Construction Group Dallas authorized by PGT? No. We’re an independent PGT service provider and we are not affiliated with, authorized by or sponsored by the manufacturer. We work on PGT products because we know them well, not because PGT endorses us. That independence means our repair-versus-replace recommendation is based on what your unit needs, not on a dealer agreement.
Do you use genuine PGT/OEM parts? Yes, for critical components like rollers, locks and weatherstripping we source OEM PGT parts whenever they’re available, which keeps your warranty compliant. When OEM stock isn’t obtainable, we use high-quality aftermarket equivalents that meet or exceed OEM specifications and we tell you which you’re receiving before the work starts.
How long does PGT service take? A weatherstripping and reseal job is usually a single visit. An insulated glass unit replacement depends on the lead time for the specific PGT unit, which we confirm before scheduling. A full window or door installation is a scheduled project with a written timeline, not a same-day repair, and we’ll give you the dates in the written scope.
What PGT models and series do you cover? We service and install WinGuard® Impact-Resistant Windows and Doors, Sentinel® by PGT® Vinyl Windows, the PGT® Aluminum Series including the 700 Series, and PGT® Sliding Glass Doors. If you’re unsure which series you have, the label on the frame or the glass etch usually identifies it and we can confirm during diagnosis.
Will service void my PGT warranty? Proper service with OEM parts doesn’t void your warranty, and we document every job with a photo record so you have the evidence if you ever file a claim. Manufacturer warranty terms vary by product and installation date, so check your original paperwork. We’ll tell you plainly what we can confirm and what only PGT can.
How much does PGT construction cost in Dallas? Typical Dallas ranges are below, with a written flat price confirmed after diagnosis. Call (833) 954-5327 for an exact quote. Estimates are free.
| Service | Typical Dallas Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
Book Your PGT Service in Dallas, TX
Whether it’s a WinGuard® window leaking at the sill, a Sentinel® unit gone foggy, or a sliding door that won’t roll, we’ll diagnose it, write the price, and document the work. Background-checked, uniformed technicians, a live person answering calls, and a free second opinion on any written estimate. Call (833) 954-5327 to book your PGT service in Dallas.
Written by the team at Rowan Construction Group Dallas.












