







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors in Dallas: What to Know First
PGT window and door work in Dallas typically runs $4,500 – $15,000 for replacement and $8,000 – $25,000 for impact-rated installation, with most single-unit repairs and reseals landing well under $2,000. We’re an independent PGT service provider – not affiliated with or authorized by PGT – and we handle the brand across Dallas homes: WinGuard impact products, aluminum series, and vinyl replacement lines.
This page is for Dallas homeowners who already own PGT windows or doors and want them repaired, replaced, or upgraded without guesswork. Every quote we write is a flat price with a written scope before any work starts, under Clause 1 of The Haven Standard. Call (833) 954-5327 for a free estimate. Our technicians have up to 19 years of experience, and they’ve worked on PGT units across Dallas neighborhoods from Lakewood to Preston Hollow.
How PGT Products Fail – and How We Fix Them
PGT builds a strong product, but Dallas’ specific climate stresses it in predictable ways. Here’s what we actually find on PGT jobs in Dallas, and what we do about each.
- WinGuard impact glass: seal failure and fogging between panes. The insulated glass unit (IGU) is the sealed sandwich of two panes with a spacer; when that spacer’s seal fails, moisture gets in and the glass fogs or hazes. In Dallas’ summer heat cycling, this shows up on south- and west-facing WinGuard units within a decade. We replace the IGU, not the whole window, which keeps the frame and the impact rating intact. It’s the single most cost-effective fix we do on PGT impact windows.
- Aluminum series: weep hole clogging and water intrusion. PGT aluminum windows drain through small weep holes at the sill. Dallas’ pollen season and wind-driven dust plug those channels, and water backs up into the frame. The real cause is usually the drainage path, not the glass. We clear and verify drainage, then re-seal. Left alone, the same clog will find its way into the wall cavity.
- Sliding glass and patio doors: roller and track wear. PGT sliding doors ride on bottom rollers that flatten and track that fills with grit. Dallas homes near the Trinity corridor get more sand and grit blown onto patio door tracks, which accelerates roller wear. We replace the rollers and resurface or replace the track, so the door glides without forcing the frame out of square.
- Vinyl frames: heat distortion and sash binding. PGT vinyl sashes can warp slightly in sustained Dallas heat, and a warped sash binds against the frame and won’t seat. We measure the warp, adjust hardware and weatherstrip where it’s recoverable, and replace the sash where it isn’t. Forcing it closed only cracks the frame.
- Hardware and weatherstripping: aging seals and sticky locks. Weatherstrip compresses and lock mechanisms stiffen with age. On a PGT door or window, that’s a seal and hardware issue, not a structural one. We replace OEM-spec weatherstrip and hardware, test the closure, and confirm the unit still locks and latches cleanly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our PGT Windows & Doors Process
- 1
Diagnostics on site. We identify the exact PGT series and unit, then find the actual failure: fogged IGU, clogged drainage, worn roller, warped sash, or failed seal. We don’t guess.
- 2
OEM vs. quality aftermarket parts decision. Where OEM parts are available and warranty-safe, we use them. Where an OEM part is discontinued or overpriced, we explain the aftermarket equivalent, match the spec, and put the choice in writing.
- 3
The written price. Before anyone touches the window, you get a flat price with a written scope – under Clause 1, the number comes before the work, every time. No change proceeds until you sign a change order.
- 4
The repair or replacement. One window or IGU is a same-visit fix. A full impact replacement is scheduled and staged. Either way, the crew is background-checked and uniformed.
- 5
The test. We open, close, lock, and check drainage on every unit before we call it done, and confirm the seal and impact rating.
- 6
Cleanup and the record. You get a documented photo record of what we found and what we did, plus the 365-Day Done Right Promise in writing.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Windows & Doors Costs in Dallas

These are real Dallas ranges from our written pricing, not bait numbers:
- Window replacement (non-impact): $4,500 – $15,000
- Impact window installation (WinGuard-class): $8,000 – $25,000
- Single-unit repair or IGU replacement: typically under $2,000
- Sliding and patio door replacement: quoted to the opening; ask for the written line item
What moves the price: the PGT series (impact glass costs more than standard), the number of units, whether we’re replacing an IGU or a full unit, frame condition, and whether your opening needs reframing. We don’t quote on the phone and we don’t ballpark – a written price is the standard before any work starts. Call (833) 954-5327 for a free estimate.
Why Dallas Homeowners Call Rowan Construction Group Dallas for PGT Work
We’re not the only people who will touch a PGT window in Dallas, but we’re one of the few who put the price on paper before the work. Our technicians have up to 19 years of experience, and they know the PGT product line well enough to know when a fogged WinGuard unit needs an IGU and not a whole window. The 365-Day Done Right Promise is backed by The Haven Standard and printed on the page, not an asterisk. Every visit includes a documented photo record as standard. And because we carry fifty-plus vetted brands – KraftMaid, Kohler, GAF, Master Halco among them – a written quote from us has honest numbers, not padded ones. Bring a competitor’s estimate and we’ll review it line by line at no charge.
FAQs

It depends on the failure and the age of the unit. PGT’s warranty typically covers manufacturing defects and seal failures for a defined period, but it generally won’t cover installation-related issues or damage from other causes. We’ll look at your unit and tell you plainly whether it’s likely a warranty claim before you spend anything. Call (833) 954-5327 for a free estimate and honest read.
We source OEM-spec PGT parts where they’re available and warranty-safe, and we only use a quality aftermarket equivalent when an OEM part is discontinued or makes no sense on cost. Either way, we explain the trade-off and put the choice in the written scope. Call (833) 954-5327 to talk through your unit.
Repair usually wins when the frame is sound and the problem is a fogged IGU, worn roller, or compressed weatherstrip – those fixes are far cheaper than a full unit and keep the original frame and impact rating. Replacement makes sense when the frame is warped, water has intruded, or the unit is past its service life. We tell you which category you’re in after we look. Call (833) 954-5327 for a free estimate.
A single-unit repair or IGU swap is typically a same-visit job. A multi-unit replacement or a full impact installation is scheduled and staged, and we give you the timeline in the written scope before we start. Call (833) 954-5327 for a free estimate with the schedule spelled out.
Yes – when the scope requires it, we pull the permits and handle the inspection. Window and door replacement that changes the opening or the egress often does, and we’ll tell you in the written quote whether your job needs one. Call (833) 954-5327 for a free estimate.
Call Rowan Construction Group Dallas at (833) 954-5327 for your free written estimate. We’ll look at your PGT windows and doors, find the real cause, and hand you a flat price with a written scope before anything starts. That’s the deal, under Clause 1 of The Haven Standard.
Written by the team at Rowan Construction Group Dallas, serving Dallas and nearby areas.












