







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Kitchen Remodeling in Dallas: What to Know First
Kohler kitchen remodeling in Dallas typically runs $14,000 – $45,000 for a full remodel, with most projects completed in 3 – 6 weeks once materials land. We write the price down before anyone picks up a tool, so you’re comparing a real number, not a phone promise. This page is for Dallas homeowners who already own Kohler fixtures – a sous-chef or apron-front sink, a Bellera or Sensate faucet, a Kohler tile surround – and want the remodel to respect what they bought. Call (833) 954-5327 for a free written estimate.
As an independent Kohler service provider, Rowan Construction Group Dallas is not affiliated with or authorized by Kohler. We name the brand because it’s in your kitchen, not because we carry a badge from the factory.
How Kohler Products Fail – and How We Fix Them
Kohler makes durable products, but Dallas water, Dallas summers, and twenty years of use find weak points. Here’s what our technicians see and what we do about it.
- Bellera undermount sink clamps corrode and the sink sags. The clamp-and-epoxy mounting system holds up in most markets, but in Lakewood and the M Streets where water runs hard, the epoxy bond eventually lets go and the sink drops a few millimeters, taking the silicone seal with it. We pull the sink, clean the old adhesive, re-set it on new clamps and a fresh bead, and pressure-test before the countertop goes back.
- Sensate touchless faucets stop sensing. The most common cause isn’t the sensor itself; it’s scale on the aerator and mineral film on the sensing window from our calcium-heavy water. We clean and descale, check the solenoid, and only swap the cartridge if the flow test says so. Sometimes a twenty-minute service fixes what a homeowner assumed was a $400 replacement.
- Apron-front (farmhouse) sinks crack at the front apron joint. The apron takes cabinet door knocks and the weight of an overfilled sink. In older Dallas kitchens where the cabinet was cut for a standard sink and adapted, that joint is a stress point. We rebuild the cabinet opening with a proper support frame and re-install with a wider silicone flange.
- Kohler cast-iron sinks and enameled fixtures chip at the drain collar. Pots and pans set down hard, or a dropped utensil, nicks the enamel. A chip under the drain is a slow leak risk. We inspect the collar at every sink job, recommend a repair or replace, and write the call-out clearly.
- Kohler tile and backsplash grout in a Dallas kitchen sees expansion movement. North Texas soils move with the wet-dry cycle, and a rigid grout joint over a slight wall movement will hairline-crack. We install with a flexible sealant at the counter joint and use an epoxy grout where the client wants a stain-proof backsplash. We tell them the trade-off – epoxy costs more, survives better.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Kohler Kitchen Remodeling Process
Every Kohler job follows the same steps, whether it’s a full gut or a fixture swap in a small remodel.
- 1
Site visit and written scope. We measure the room, photograph existing conditions, identify every Kohler fixture by model, and note what can stay. You get a flat written price with the scope spelled out.
- 2
Diagnostics. We check supply lines, shut-off valves, drain slope, cabinet substrate, and existing waterproofing. What we find goes in the photo record, not in a verbal mention on the way out.
- 3
Parts decision. Kohler OEM parts carry the warranty; a quality aftermarket cartridge may be half the cost but voids it. We price both and let you choose, in writing.
- 4
Build and install. Cabinets, countertops, tile, backsplash, and Kohler fixtures installed to spec. Any change requires a signed change order before work proceeds – no verbal “we’ll sort it out later.”
- 5
Test and document. We run every fixture through a cycle, check for leaks, and hand over the photo record of what was found and done.
- 6
365-Day Done Right Promise. If it isn’t done right, we make it right. Backed by The Haven Standard, not a handshake.
What Kohler Kitchen Remodeling Costs in Dallas

Here are the real Dallas ranges for the most common Kohler kitchen jobs. These are flat written prices, not estimates that climb once work starts.
| Job | Dallas Price Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the price: whether the plumbing moves (drain and supply relocations are the biggest single line), the countertop material (quartz runs higher than laminate), and whether cabinets are refaced or replaced. Bringing in a competitor’s written estimate? We’ll review it line by line, free – the Free Second Opinion offer, no strings. Call (833) 954-5327 for your free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Dallas Homeowners Call Rowan Construction Group Dallas for Kohler Work
Kohler is one of fifty-plus brands we source and install, alongside KraftMaid and Wellborn cabinets, Cambria and Caesarstone countertops, GAF roofing, PGT windows, and Master Halco fencing. That sourcing depth is why our written quotes carry honest numbers instead of inflated ones. Our technicians have up to 19 years of experience, and they’re background-checked and uniformed. Every visit includes a documented photo record as standard, not an upgrade. A live person answers the phone around the clock. Under Clause 1 of The Haven Standard, the price is written before anyone starts, and no change proceeds without your signature on the change order – the reason our projects finish within a few percent of the agreed number across 4,000-plus jobs since 2007.
FAQs

Will a kitchen remodel void my Kohler fixture warranty? Not if it’s done right. Kohler’s warranty covers defects in the product, and remodeling around a fixture doesn’t void it as long as no one damages the fixture or uses a non-conforming part. We document the install so you have evidence if a claim ever comes up. Call (833) 954-5327 to talk through your specific fixture.
Can you get Kohler parts for older models? Usually, yes. Kohler keeps parts for most faucet and fixture lines going back years, and we source through trade channels as well as direct. When OEM is unavailable, we tell you the aftermarket alternative and the warranty trade-off in writing before we install anything.
Should I repair or replace a Kohler faucet or sink during a remodel? If the fixture is under 10 years old and the finish is intact, repair usually makes more sense than replacement, and the cost difference can be a few hundred dollars versus more than a thousand. We check each fixture and tell you which way the numbers point.
How long does a Kohler kitchen remodel take in Dallas? A small remodel runs about 2 weeks; a full kitchen with cabinet, countertop, and tile work runs 3 – 6 weeks, and the schedule depends on material lead times more than labor. We give you a written timeline with the written price. Call (833) 954-5327 for a free estimate.
Do you pull permits for a Dallas kitchen remodel? Yes. Permits are pulled and inspections passed where the work requires them. We tell you at the site visit which inspections apply to your job.
Get Your Free Kohler Kitchen Remodeling Estimate
Call (833) 954-5327 to schedule your free estimate. We’ll visit, measure, and hand you a written price with a written scope and a written warranty – the number before the work, every time. If it isn’t done right within the year, the 365-Day Done Right Promise backs the fix.
Written by the team at Rowan Construction Group Dallas, serving Dallas and nearby areas.












