







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Bathroom Remodeling in Dallas: What to Know First
A full Kohler bathroom remodeling project in Dallas generally runs $9,000 – $28,000, with most jobs finished in two to four weeks once materials are on site. We’re an independent Kohler service provider, which means we install and remodel around Kohler fixtures without any manufacturer affiliation. You get a flat written price and a written scope before work begins, and that number doesn’t move unless you sign a change order.
This page is for Dallas homeowners who already have Kohler in the house – a Memoirs vanity top, a Devonshire soaking tub, a Purist shower trim – and want the remodel done in a way that respects what’s there. Call (833) 954-5327 to schedule a free estimate.
How Kohler Products Fail – and How We Fix Them
- Memoirs and Devonshire toilets with a weak flush after year eight or nine: Homeowners usually assume the toilet is worn out and price a replacement. The real cause is often mineral scale on the rim jets and a flapper that’s stiffened in Dallas’s hard water. We pull the tank, descale the rim feed, and replace the flapper and fill valve with Kohler OEM parts. A $90 fix, not a $700 swap.
- Purist and Loure shower trim cartridges that drip at the handle: The ceramic cartridge in these pressure-balance valves wears faster when the water supply carries sediment, which is common in older Dallas plumbing. We pull the cartridge with the correct seating tool so the valve body isn’t scored, then install a genuine Kohler replacement. If we cracked the valve body forcing an aftermarket cartridge, you’d be looking at a wall opening and a $1,800 repair instead of a $220 service call.
- Villager and Bancroft tubs with hairline cracks at the overflow: Cast iron and acrylic Kohler tubs both take stress at the overflow plate, especially in slab-on-grade homes where the tub sits on a less forgiving base. A hairline crack isn’t cosmetic; it’s a leak path into the framing. We scope the subfloor during demolition and repair or replace the drain assembly before tile goes back down.
- Kohler shower valves behind tile that were installed with the wrong rough-in depth: A very common finding during a tub-to-shower conversion in Dallas. The valve body sits too shallow or too deep in the wall for the new trim kit, so the escutcheon won’t seal against the tile. We measure rough-in depth to the sixteenth of an inch before we close up the wall, which is why Kohler Rite-Temp valve retrofits go smoother on our jobs than on most.
- Memoirs and Kathryn vanity sinks that crack at the drain hole: These are cast from vitreous china, and the drain hole is the thinnest part. Over-tightening during a previous install or a dropped tool causes a star crack that spreads. We inspect every sink and vanity top during demo, and we won’t reinstall a piece with a visible crack, because the leak will show up six months later at the ceiling below.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Kohler Bathroom Remodeling Process
- 1
Written estimate and scope. We walk the bathroom, photograph everything, and hand you a flat written price and a written scope before any tool comes out of the truck. Under Clause 1 of the Haven Standard, that number is the number.
- 2
Diagnostics and documentation. We open the wall where needed, check the valve rough-in depth, the subfloor, and the drain assembly. Every visit includes a documented photo record, so you see exactly what we found.
- 3
Parts decision. We use Kohler OEM parts for anything inside the valve body or under the tank, and quality aftermarket for items Kohler doesn’t make (PEX, cement board, waterproofing membrane). We tell you which is which in the written scope.
- 4
Install and finish. Tile, shower pan, trim, fixtures, and vanity go in on a sequenced schedule. If something changes – a hidden soft spot in the subfloor, a drain that needs re-plumbing – the change order gets signed before the work continues.
- 5
Test and clean. We run every fixture through a full cycle, check for leaks at every joint, and pressure-test the shower pan for 24 hours before we call it done. Then we clean up and hand you the photo record.
- 6
365-Day Done Right Promise. If it’s not done right in the first year, we come back and make it right. Backed by The Haven Standard, not a handshake.
See the difference
Before
After
Before
After
Before
AfterWhat Kohler Bathroom Remodeling Costs in Dallas

Dallas pricing for Kohler-focused bathroom projects, calibrated to the local market:
| Project | Typical Range |
|---|---|
| Full Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Three things move the price on a Kohler job: which series you’re installing (Purist and Memoirs trim sit at the top of the range, Devonshire and Bancroft in the middle), whether the valve body needs repositioning once the wall opens, and whether tile is laid over existing substrate or stripped to the studs. A cast iron Kohler tub weighs over 300 pounds and takes a different subfloor prep than an acrylic one – that’s a real line item. Bring us any written Kohler estimate and we’ll review it line by line at no charge.
Call (833) 954-5327 for an exact quote – estimates are free.
Why Dallas Homeowners Call Rowan Construction Group Dallas for Kohler Work
We’ve been building under The Haven Standard since 2007, and every Kohler bathroom project we take starts the same way: written price, written scope, written warranty. Our technicians have up to 19 years of experience, and they know which Kohler series show up in Dallas homes and what tends to fail on each one. Calls are answered by a live person, and every crew is background-checked, uniformed, and arrives with the photo record as a standard deliverable.
If your remodel takes in more than the bathroom, we also work with KraftMaid and GAF, PGT, and Master Halco – so the whole scope stays under one written price. 4,000-plus projects, every one quoted before work started.
FAQs

Does remodeling my bathroom void my Kohler warranty?
No, as long as the Kohler fixture itself isn’t altered or improperly installed. Kohler’s warranty covers the fixture against manufacturing defects, not the workmanship around it. We install per Kohler’s published spec, keep the OEM parts receipts, and hand you the documentation, so if a fixture fails inside its warranty window, you have what Kohler needs.
Can you match my existing Kohler fixtures during a remodel?
Usually, yes. Kohler keeps most Memoirs, Devonshire, and Purist finishes in production for years, and we can source discontinued trim through Kohler’s replacement parts channel. If the exact finish is gone, we tell you in the written scope before you commit. Call (833) 954-5327 and we’ll tell you what’s still available.
Repair or replace a Kohler toilet or tub – how do I decide?
If the fixture is under 10 years old and the failure is a flapper, fill valve, or cartridge, repair almost always wins – typically $90 – $220 in parts and labor. Replace when the china is cracked, the tub has a structural leak, or you’re already remodeling the bathroom and the labor to reuse the old fixture doesn’t pencil out. We’ll price both options on the written estimate.
How long does a Kohler bathroom remodel take in Dallas?
Two to four weeks for a full bath, one to two weeks for a tub-to-shower conversion, and a single day for a vanity swap. Permit review in Dallas County can add a week up front for anything that moves plumbing. We pull the permits and hold the inspection schedule.
Will the price change once work starts?
Only if you sign a change order. If we open the wall and find a hidden issue – a soft subfloor, a mis-aligned valve rough-in, a rusted drain – we photograph it, price the fix, and you approve it before work continues. Nothing on a Kohler job moves a dollar without your signature. Call (833) 954-5327 for a free estimate on your bathroom.
Written by the team at Rowan Construction Group Dallas, serving Dallas and nearby areas.












