A Rowan company - serving Dallas, TX
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Cambria · Dallas

Cambria Construction Service in Dallas, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Dallas
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A new curved paver walkway to the front porch
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new bay window with a cushioned seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Dallas Homeowners Choose Cambria Construction

Rowan Construction Group Dallas provides independent Cambria quartz service in Dallas, TX: countertop installation, island fabrication, backsplash work, and repair of failed seams, edges, and cracks. We’re a fabricator-installer, not a dealer, and we’re not affiliated with, authorized by, or sponsored by Cambria. What sets our Cambria work apart is specific: we template and set seams around how the slab’s mineral pattern actually reads, we leave substrate and ventilation for Dallas heat, and we put a flat written price on the work before anything is cut.

Call (833) 954-5327

Why Trust Rowan Construction Group Dallas for Your Cambria Construction?

Installers leveling a new base cabinet during a kitchen remodel

Our technicians have up to 19 years of experience, and a good share of that has been spent handling quartz slabs by hand: templating them, cutting the sink opening, profiling the edge, and setting the seam. Cambria is a quartz surface made from roughly 93 percent quartz by volume with a polymer binder, manufactured in Minnesota. That matters at the bench. The mineral movement in a Brittanicca or Annicca slab doesn’t repeat, so the fabricator has to read the actual piece in front of them rather than work from a photo or a spec sheet.

We service Cambria in a warranty-safe way: we cut and polish with water-fed tooling, we don’t drill or notch where a heat source will sit, and we back the installation with a written scope and a written warranty. Under Clause 1 of the Haven Standard, the price is written before anyone starts. We use Cambria-matched quartz or a certified color-match epoxy on repairs, never generic stone epoxy. And because we’re independent, we’ll tell you when a job is small enough to handle yourself with a phone call to the manufacturer, no charge from us.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Cambria Construction Problems We Fix in Dallas

Most of the Cambria calls we run in Dallas come down to fabrication and heat, not the slab itself. Here are the five we see most.

  • Resin pooling and blotchy seams. When a slab is fabricated in a humid shop and then installed in a Dallas kitchen with weak ventilation, the epoxy at the seam can cure unevenly, leaving a dull or cloudy line. It usually shows up within the first year, and it’s fixable by re-cutting the seam and re-polishing with Cambria-matched resin.
  • Thermal shock cracks near cooktops and built-in ovens. Quartz tolerates a lot, but a slow cooker, a hot pan set down off the burner, or an oven with poor clearance can crack a Cambria top. We see it most on Brittanicca Gold runs where the cooktop was set close to the sink seam and no insulating barrier was used.
  • Edge chipping on 2cm Cambria islands. A 2cm slab with a factory edge used at a high-traffic island corner will chip. The fix is a fabricated profile, not a patch, and it’s why we cut a proper bullnose or eased edge on every island we fabricate.
  • Sealer haze from a well-meant mistake. Cambria is non-porous and never needs sealing. A homeowner or handyman who applies a stone sealer to it traps moisture and dulls the finish. We strip it, re-polish, and leave the surface clean.
  • Staining at sink cutouts. A poorly sealed cutout, or one where the undermount sink was set with the wrong adhesive, will draw moisture and discolor the surrounding quartz. We reset the sink and reseal the cutout properly.

Cambria Parts & Our Repair-vs-Replace Approach

A new paver pool deck

Cambria doesn’t sell consumer parts, so the honest answer on a repair is that “parts” means slab material. When we repair a Cambria top, we use Cambria-matched quartz from a remnant slab of the same series, or a certified color-match epoxy when the damage is small. Generic stone epoxy will not match Cambria’s mineral pattern, and on a Brittanicca or Annicca it will stand out.

We don’t claim to stock Cambria locally. Each job is templated and the material is sourced from a distributor as the project requires, so the price on your quote reflects the actual slab you’re getting. If a crack runs through a seam or near a cutout, replacement of that run is usually more reliable than re-polishing, because heat and flex will reopen the repair. If the crack is cosmetic and small, a re-epoxy and re-polish is the right call and we’ll say so. Call (833) 954-5327 and we’ll walk your top before we quote.

Our Cambria Service Process – Step by Step

  1. 1
    Diagnosis. We check the crack path or seam with a straightedge and a light, check the substrate, and check what’s sitting against the quartz. If a heat source is involved, we note the clearance.
  2. 2
    Scope and written price. You get a flat price and a written scope before anything is cut: whether we’re re-polishing, re-seaming, or templating a replacement run, and what edge profile you’re getting.
  3. 3
    Fabrication or repair. Slabs are cut and polished water-fed. Repairs use Cambria-matched resin. Edge work gets a fabricated profile, not a factory edge.
  4. 4
    Install and test. We set the piece, check the seam for shade match under daylight, and confirm the sink and cooktop clearance.
  5. 5
    Written warranty and photo record. You get the documentation on the way out, included, not as an upgrade.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Cambria Products We Service & Install in Dallas

We work with the Cambria series Dallas kitchens actually specify: the Britannica line, including Brittanicca and Brittanicca Gold, plus Ella, Torquay, and Annicca. We fabricate countertops, kitchen islands, and backsplashes in slab or tile. We don’t claim to stock any of these locally; material is sourced per project so the quote reflects the slab you receive. If you have a remnant from a prior job and want to match it for a new island or backsplash, bring it and we’ll template against it.

We Also Service These Brands

Cambria is one material, not the whole job. Rowan Construction Group Dallas also installs and services KraftMaid and Wellborn cabinets, Kohler and Toto fixtures, GAF and Owens Corning roofing, and PGT windows and doors. If your Cambria countertop work ties into a larger kitchen or bathroom project, you’re not handing it off to a second contractor. It’s one written price and one written scope.

FAQs – Cambria Construction Service in Dallas

A freestanding soaking tub in a remodeled primary bathroom

Is Rowan Construction Group Dallas authorized by Cambria? No. We’re an independent Cambria service provider. We’re not authorized, sponsored, or warranted by Cambria, and we’re not a Cambria dealer. We fabricate and install Cambria quartz, and we tell you that plainly so you know exactly what you’re buying.

Do you use genuine Cambria/OEM parts? For repairs, we use Cambria-matched quartz from a remnant slab of the same series, or a certified color-match epoxy. We don’t substitute generic stone epoxy on a Cambria top. Material is sourced per job, not stocked.

How long does Cambria service take? A repair can be a same-visit job. A new countertop or island is templated, fabricated, and installed over multiple visits, and we give you the timeline in the written scope before work starts.

What Cambria models/series do you cover? The Britannica line, including Brittanicca and Brittanicca Gold, plus Ella, Torquay, and Annicca. If you’re not sure which series your top is, bring a photo and we’ll identify it.

Will service void my Cambria warranty? Cambria’s warranty is Cambria’s to interpret, and we don’t speak for them. What we can tell you is we fabricate and install in a way that protects the slab, we use Cambria-matched materials, and we give you a written warranty on our work.

How much does Cambria construction cost in Dallas? Countertop installation runs $2,000 – $6,500, a Cambria-top kitchen island is $3,000 – $10,000, and backsplash work is $800 – $2,500. Call (833) 954-5327 for an exact quote; estimates are free.

Book Your Cambria Service in Dallas, TX

If you have a Cambria top that’s cracked, seamed wrong, or ready to install, call Rowan Construction Group Dallas at (833) 954-5327. We’ll give you a flat written price and a written scope before any work starts, and a free second opinion on any estimate you already have. Estimates are free.

Written by the team at Rowan Construction Group Dallas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelightsA new black aluminum pool fence with a gateA new wood side gate with black hardwareA new concrete driveway with a paver border

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Dallas

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Dallas team

A local vetted partner works across Dallas and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 954-5327
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Rowan Construction Group Dallas responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch