







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers in Dallas: What to Know First
Belgard paver driveways in Dallas typically run $7,000 – $18,000 installed, and a paver patio runs $3,500 – $11,000, depending on the series, base depth, and square footage. As an independent Belgard service provider, Rowan Construction Group Dallas works on Belgard driveways, patios, walkways, and pool decks across the city, and we put the price in writing before anyone lifts a paver. Most residential Belgard jobs take two to five working days once materials are on site.
This page is for Dallas homeowners who already have Belgard on the ground, or have chosen it and want to know what they’re actually buying. It covers the series that show up most in Dallas, how they fail here, and what a written, flat-price quote should include. Call (833) 954-5327 to schedule a free estimate.
How Belgard Products Fail – and How We Fix Them
Belgard makes a good paver. Most failures we see in Dallas aren’t the stone giving out. They’re what’s under it, what’s between it, and what the weather does to both. Here are the patterns we run into most.
- Joint sand washing out on the driveway apron. On Belgard’s Cambridge Cobble and Urbana Stone driveways, the first place we see joint sand disappear is the transition where the driveway meets the street. Dallas downpours sheet across that apron, and if the polymeric sand wasn’t compacted into a saturated joint, it scours out within a season. We re-sand with a joint-stabilizing polymeric, compact it wet, and check the apron slope so water leaves instead of sitting.
- Rutting over a shallow base. Heavy pickups and SUVs parked on the same spot rut a driveway fast when the base is under four inches. Belgard’s thicker Mega-Bergamo and Mega-Lafitt profiles handle load better than a thin travertine-style paver, but no paver fixes a base that wasn’t excavated deep enough. When we replace a rutted section, we pull the failed pavers, re-excavate to compacted base, and re-lay to the original coursing.
- Efflorescence that keeps coming back. That white chalky bloom on a new Catalina or Urbana patio is usually salts migrating out of the mortar or base, not a stain, and it’s common in Dallas’s humid spring. We clean it with the right acid dilution and dry-brush, and we won’t seal over an active bloom because sealing traps it.
- Sealer that yellows or flakes. A film-forming sealer applied too thick on a hot Dallas afternoon cures cloudy. We strip failing sealer on Belgard surfaces and reapply a breathable, penetrating sealer at the manufacturer’s spread rate, so the color stays true rather than turning amber in the sun.
- Loose border and edge restraint. Driveways with a soldier-course border fail at the edge first when the plastic edge restraint wasn’t spiked into the base. Once the border shifts, the field pavers follow. We reset the border, re-spike the restraint, and re-compact the whole edge line before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Belgard Driveway & Pavers Process
- 1
On-site diagnosis. We walk the Belgard surface, check base depth at a pulled paver or test hole, look at slope and drainage, and photograph what we find. You get the photos whether or not you hire us.
- 2
Written scope and flat price. Under Clause 1 of The Haven Standard, the price is written before any work starts. You get a flat number with the scope in writing, not an hourly estimate that drifts.
- 3
Materials decision. We specify the Belgard series to match what’s already down, or a compatible line if the original is discontinued, and we tell you in writing which it is. No substitutions get made without your sign-off on a change order.
- 4
The work. Base prep, compaction, laying, edge restraint, and joint sand, done to the depth the load calls for. Every crew is background-checked and uniformed, and a live person answers our line around the clock.
- 5
The walk-through and photo record. We test drainage with a hose, confirm the joints are filled, and hand you the documented photo record of what was found and what was done.
- 6
The guarantee. The 365-Day Done Right Promise covers the work for a full year. If it isn’t done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Belgard Driveway & Pavers Costs in Dallas

Dallas pricing depends on the Belgard series, square footage, base depth, and whether we’re working over an existing base or starting from bare ground. These are the ranges we write on our own quotes.
- Paver driveway installation: $7,000 – $18,000
- Driveway replacement: $5,000 – $14,000
- Paver patio installation: $3,500 – $11,000
- Concrete driveway installation: $4,500 – $12,000
- Driveway sealing: $250 – $700
What moves the price: the Belgard series you pick, square footage, excavation depth, whether the base is being rebuilt, and how much border and restraint work the job needs. A driveway over a stable base with a soldier-course border already in place costs less than a full tear-out. Bring a competitor’s quote and we’ll review it line by line at no charge, then hand you a written price you can compare. Call (833) 954-5327 for a free estimate.
Why Dallas Homeowners Call Rowan Construction Group Dallas for Belgard Work
Our technicians have up to 19 years of experience on paver and hardscape work, and they know the difference between a Belgard series that bellies because the base failed and one that was laid wrong from the start. That matters when you’re asking for a repair and want the right fix the first time.
We’ve delivered more than 4,000 projects since 2007, every one with a written price before work started and a documented record when the crew left. The 365-Day Done Right Promise is printed on the page, not tucked behind an asterisk. We work with fifty-plus vetted material brands across our trades, including Belgard and Techo-Bloc pavers, so the quote reflects honest material numbers instead of inflated ones. For other parts of your home, we also work with KraftMaid, Kohler, GAF, and PGT.
One honest note: we’re an independent Belgard service provider. We’re not affiliated with or authorized by Belgard, and we don’t claim to be. What we do claim is a documented job, a written price, and a photo record you keep.
FAQs

Does repairing or replacing my Belgard pavers void the Belgard warranty? Usually not, if the work is done correctly. Belgard’s warranty is limited to the pavers themselves, and it’s voided by things like using the wrong joint sand, sealing against the manufacturer’s guidance, or laying over an unqualified base. We work in a warranty-safe way and tell you in writing which parts of your job could touch the warranty before we start.
How do I know if a rutted Belgard driveway needs repair or full replacement? If the rutting is limited to one or two areas and the pavers themselves are intact, we can usually pull, re-base, and re-lay those sections and match the existing course. If the base is failing across most of the driveway, a full replacement is the honest answer. We check base depth at a test hole before recommending either.
Can you match a Belgard series that’s been discontinued? Often, yes. Belgard rotates series, and if yours is no longer made we source the closest compatible line or work from leftover stock when we can find it. We tell you in writing what’s being substituted and show you a sample before you agree. Call (833) 954-5327 for an exact quote, and estimates are free.
How long does a Belgard driveway or patio job take in Dallas? A paver patio typically runs two to three working days once materials arrive, and a full driveway runs three to five, weather permitting. Dallas rain can push the schedule, and we won’t lay pavers over saturated base just to hit a date. We give you the timeline in writing with the price.
Will the price change once work starts? Not without a signed change order. Under the Haven Standard, no work proceeds on a change until you’ve signed it, and that discipline is why our projects finish within a few percent of the number you agreed to. If we find something under the base that changes the scope, you see the number and decide before anyone touches a tool.
Do you seal Belgard pavers? We do, and driveway sealing runs $250 – $700. We recommend sealing new pavers only after the efflorescence has cleared and the joints have settled, not immediately, because sealing a fresh Belgard surface in Dallas humidity can trap moisture and cloud the color. Call (833) 954-5327 for a free estimate on sealing or a full installation.
Written by the team at Rowan Construction Group Dallas, serving Dallas and nearby areas.












