







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation Cost in Dallas, TX: What the Number Actually Covers
Cabinet installation cost in Dallas runs $4,000-$13,000 for most kitchens, with installation labor alone at $150-$300 per linear foot. Call (833) 954-5327 for a written price before any work starts. What that labor rate excludes is the reason quotes here vary so widely: the shimming, blocking, and scribe work required when the wall behind the cabinets is a quarter-inch out of plumb, which is normal in a 1960s East Dallas kitchen that has lived through decades of blackland clay movement.

Why Dallas Cabinet Quotes Don’t Match the Labor Rate
Dallas is a demolition-and-rebuild market more than a remodel market. Blackland clay swells through wet springs and shrinks through long dry summers, and that cycling moves foundations across the older core – East Dallas, Oak Cliff, the older north-side neighborhoods. The result is a housing stock split between post-war single-story ranches on pier-and-beam or shallow slab, and dense modern infill townhomes closer in. Both show up on the same block.
That matters for cabinets because cabinets are installed against a wall and onto a floor. When the wall has racked even 3/8 inch off plumb – common after a dry summer of foundation heave – the installation scope grows. Scribe molding, blocking, and shimming add 15-25% to installation labor. A quote that doesn’t mention wall condition is a quote that will generate a change order. Under the Haven Standard, every Rowan Construction Group Dallas project carries a written, flat price from the start, and Clause 1 exists so the price you sign is the price you pay.
What the pre-installation photo record buys you
Before any cabinet comes down, our crews photograph the existing wall condition – the substrate, the soffit framing, the floor level at each cabinet run. Those photos become the baseline. If a hidden problem surfaces mid-installation, the change order price is tied to documented evidence, not a verbal description. No work proceeds on a change until the change order is signed. That administrative discipline is why projects finish within a few percent of the agreed number.
How Much Does Cabinet Installation Cost in Dallas?
Break the total into separate lines and the numbers stop being mysterious. Here are the Dallas market ranges, itemized:
| Line Item | Cost Range (Dallas) |
|---|---|
| KraftMaid stock cabinets | $80-$150 per linear foot |
| KraftMaid semi-custom cabinets | $150-$280 per linear foot |
| Wellborn full-access cabinets | $200-$350 per linear foot |
| Installation labor | $150-$300 per linear foot |
| Wall prep and blocking | $8-$18 per linear foot |
| Hardware (per door/drawer) | $12-$45 |
| Soffit removal and drywall patching | $400-$900 |
| Full cabinet installation project | $4,000-$13,000 |
That top row matters more than it looks. Cabinet brand tier drives the bulk of the cost, and the tier you choose changes what the installation scope can be. KraftMaid stock goes in fast and true in a standard run. Wellborn full-access boxes are heavier, taller, and less forgiving of an out-of-level floor. Both are brands we source, so the written quote reflects honest material numbers rather than inflated ones. A full kitchen remodel that folds cabinets into a wider scope typically lands at $14,000-$45,000.

What Adds Cost in Dallas Kitchens That Other Cities Don’t See
The variables below are the ones generic per-linear-foot articles collapse. Each is a real line item in a Dallas kitchen, and each is why two houses with the same cabinet count can carry very different totals.
- Out-of-plumb walls. Scribe molding, blocking, and shimming to correct a wall racked 3/8 inch add 15-25% to installation labor. $8-$18 per linear foot in wall prep is the floor, not a worst case.
- Drop soffits. Many 1970s-1990s Dallas kitchens have soffits above the uppers. Removing them to allow taller cabinet runs adds $400-$900 in demo and drywall patch – and can reveal out-of-code wiring that needs an electrician before installation proceeds.
- Foundation movement. After a dry Texas summer, we get the wave of sticking doors and diagonal drywall cracks that signal blackland-clay heave. Patching the drywall is not the fix; the fix is usually piers under the slab, and cabinets installed on a floor that hasn’t been stabilized will rack.
- Countertop sequencing. Cambria and Caesarstone counters are templated after the cabinets are installed and level. A rushed install that leaves boxes unlevel forces a re-template, adding $300-$600 and 10-14 days to the countertop timeline. Countertop installation runs $2,000-$6,500 on its own.
The same wall-condition logic applies when we’re scoping Kitchen Remodeling as a full project – cabinets are one line among many, and pre-work documentation catches hidden costs before they become change orders. If you’re comparing contractors, our Free Second Opinion on any written estimate reviews a competitor’s quote line by line at no charge.
What to Look For in a Dallas Cabinet Installation Quote
Compare the following five elements across quotes. A quote that skips any of them is a quote you can’t compare against the others – and the gap is where a change order comes from.
- A flat written price with a written scope. Not “call for a quote.” Not a range. A number and a scope in writing before any work starts.
- Wall condition noted. A serious installer either checks plumb and level before quoting or states the assumption. An unexplained $150/LF or a rock-bottom $4,000 total usually means the wall condition was never priced in.
- Brand and tier named. KraftMaid stock, KraftMaid semi-custom, and Wellborn full-access are $80/LF to $350/LF apart. A quote that says “quality cabinets” without a tier is hiding the biggest variable.
- Hardware itemized. At $12-$45 per door or drawer, hardware swings a 40-box kitchen by a thousand dollars.
- Documented visits. A photo record of what was found and what was done, included as standard – not an upgrade.
Rowan Construction Group Dallas puts our technicians’ up-to-19 years of experience against exactly this sort of comparison work. Crews are background-checked and uniformed, and a live person answers calls 24/7.
What Happens to Your Countertop While the Cabinets Install
Cambria and Caesarstone counters are laser-templated against the installed cabinets, so the install order is fixed. Get the boxes level and set, and the template is a single visit. Rack the boxes or skip the shim work and you’re paying for a re-template: $300-$600 and 10-14 days on the countertop timeline. Every week you’re waiting is a week without a usable counter, and a full kitchen remodel that’s rushing a re-template loses schedule on the room. That dependency is why the wall and floor prep is worth doing right the first time – and why our countertop submittal and installation carries the same written-price discipline as the cabinet line.
FAQs
Cabinet installation in Dallas runs $4,000-$13,000 for a typical kitchen, with installation labor at $150-$300 per linear foot. Wall prep and blocking add $8-$18 per linear foot, and damaged or out-of-plumb walls in older East Dallas or Oak Cliff homes can push installation labor 15-25% higher. Call (833) 954-5327 for an exact written quote – estimates are free.
Replacement is usually the better value in Dallas when the existing boxes are out of level with the floor or the wall behind them has moved. Refacing saves roughly half the cost of new cabinets but does nothing for an out-of-plumb wall, so shimming costs still apply. For kitchens in pier-and-beam homes, replacement with the wall correction priced in is often the more durable choice. Call (833) 954-5327 for a written comparison.
Sometimes. If you’ve noticed sticking doors, diagonal drywall cracks, or a floor that slopes toward one wall after a dry summer, the foundation may have moved – classic blackland-clay heave in Dallas – and cabinets installed on an unstable slab will rack. Our pre-installation photos catch the wall and floor condition before boxes go in, and we’ll tell you when a pier or leveling step comes first.
The install itself can often be completed in one to two days for a standard kitchen, but wall prep, soffit removal, and countertop templating extend the full timeline. Every visit includes a documented photo record so you can see what was found and what was done. Call (833) 954-5327 to check scheduling for your Dallas kitchen.
Get Your Written Cabinet Installation Price
Rowan Construction Group Dallas puts the number in writing before anyone picks up a tool, with the Haven Standard and 365-Day Done Right Promise behind every job. If you’re ready to stop comparing ranges and start comparing a real price, call (833) 954-5327 for your free estimate. We answer 24/7 with a live person.
Written by the team at Rowan Construction Group Dallas, serving Dallas, TX.
What Our Customers Say
"They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O.












